Philips LX7500R/04 - Manual (Page 35)

Programming a recording
without the ShowView ® system
1 Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2 Press and hold DVD/MON for 1 second.
3 Press TIMER.
4 Press
4 or 3 as often as necessary to select the line
Timer programming.
5 Press
2 to confirm the selection.
➜ The entry field Date is selected.
6 Use
4, 3 or the numerical buttons to enter the date.
0 0 To programme a repeated recording press RETURN as
often as necessary to select the desired option:
➜ Mo-Fr: for recording to be repeated daily from Monday
to Friday
➜ e.g. Mo: for recording to be repeated weekly (every
week on the same day, e.g. Monday)
7 Press
2 to select the entry field Prog..
8 Use
4 or 3 to enter the programme. If you wish to
programme recordings from additional equipment via a
scart socket on the DVD recorder system select one of the
following options:
➜ EXT1: Recordings via the scart socket 1 is selected.
➜ EXT2: Recordings via the scart socket 2 is selected.
9 Press
2 to select the entry field Start.
10 Use
4, 3 or the numerical buttons to enter the start time.
0 0 To switch on VPS/PDC press RETURN as often as
necessary until 8 lights up.
➜ VPS/PDC is switched on.
11 Press 2 to select the entry field End.
12 Use
4, 3 or the numerical buttons to enter the time to
end.
0 0 To change the recording mode press RETURN as often as
necessary to select the desired recording mode.
13 Press OK again to store the entire programming
information.
➜ The entire programming information is stored.
14 Press TIMER to end.
15 Load a disc on which you want to record in the tray.
➜ The screen with the index pictures of the disc appears.
16 On a DVD+RW: Press
4 as often as necessary to
select an empty title at the end of the disc. Otherwise
previous recordings may be overwritten.
17 A timer recording will only start if you have switched
the DVD recorder system to standby or if you have
selected TUNER, CD, CDR or TAPE: Press 2 or
TUNER, CD, CDR or TAPE.
➜ If any recordings are programmed, TIMER lights up.
0 0 To stop a running timer recording before the scheduled
end, press
9 on the DVD recorder system.
Timer recording
35
English
VPS Rec
Date Prog. Start PDC End Mode
19 PHI 09:00 * 10:30 M4
To store
Press OK Mo-Fr/Weekly
Press RETURN
Timer
Timer programming