Philips LX7500R/04 - Manual (Page 41)

Settings for a disc
1 Press STOP
9 when playback is stopped or press
DISC MENU during playback.
2 Press
3 as often as necessary until you reach the first title
of the disc menu.
3 Press 3 again.
➜ The disc info screen appears.
The disc info screen shows
– the name of the disc,
– the TV system of the disc (PAL or NTSC),
– if the disc is write protected (Locked or unlocked)
– if the edits you´ve done on this disc will be available on
another DVD player.
0 0 To exit the disc info screen press
4.
4 Press
2 to enter the menu Settings for My DVD.
In the menu Settings for My DVD you can
– change the disc name,
– activate or deactivate the write protection,
– erase a DVD+RW,
– prepare a DVD+R or DVD+RW for playback on
another DVD player (Finalise disc or Make edits
compatible).
Changing the disc name
(DVD+R, DVD+RW)
1 Select the Settings for menu. See “Settings for a disc”.
2 Press
4 or 3 as often as necessary to select the lineDisc
name. Next, press 2 to enter the menu.
3 Use 1 or 2 to move to the character to be deleted or
substituted.
➜ The character is highlighted.
4 Use
4 or 3 or the number buttons to select a new
character, symbol or number.
0 0 To switch between upper and lower case press SELECT.
0 0 To delete a character press CLEAR.
5 Repeat steps 3–4 until the name of the recording is
changed as desired.
6 Press OK to confirm the new name.
➜ Storing name is displayed.
7 Press
1 to end.
Activating or deactivating the
write protection
You can prevent a recording on a DVD+RW disc from
accidental erasure by protecting it. However, the protection
can be activated for the entire disc only. An individual
recording cannot be protected. DVD+R discs can be
protected the same way as DVD+RW discs as long as they
are not finalised.
1 Select the Settings for menu. See “Settings for a disc”.
2 Press
4 or 3 as often as necessary to select the line
Protection.Next, press
2 to enter the menu.
3 Press
4 or 3 as often as necessary to select either the line:
Unprotected: for deactivating the write protection
Protected: for activating the write protection
4 Press OK to confirm.
5 Press
1 to end.
Editing a disc
41
English
Settings for My DVD
Disc name My DVD
Protection Unprotected
Erase disc
Make edits compatible Press OK
15:06 hr
07 3SAT
Unlocked
PAL
DVD playback
Edits
My DVD
02:25:03 used
Tue 25/03/2004