Philips LX7500R/04 - Manual (Page 53)

Using a decoder to decode a TV
channel
Some TV channels are encoded and can be watched
without distortions only with a decoder. If you have
connected a decoder, please set which TV channel should
be decoded with the decoder.
Note: The decoder must be connected to EXT-2 AUX I/O.
1 Press DVD/MON as often as necessary to see the
TV channel currently selected on the DVD recorder
system.
2 Press CH+ or CH– or 0–9 repeatedly to select the
TV channel which you want to decode with the decoder.
3 Press SYSTEM MENU.
4 Press
1 as often as necessary to select A.
5 Press 4 or 3 as often as necessary to select y
Installation. Next, press
2 to confirm.
6 Press 4 as often as necessary to select Manual search.
Next, press
2 to confirm.
7 Press
4 as often as necessary to select Decoder.
8 Press 2 repeatedly to select On.
➜ The decoder will be used to decode the selected TV
channel.
0 0 To switch the decoder off for the selected TV channel,
press
2 to select Off.
9 Press OK to confirm.
10 Press SYSTEM MENU repeatedly to end.
0 0 If necessary, repeat steps 2–10 for other encoded
TV channels.
Setting the time and date
Some TV channels broadcast additional information about
the time and date.The DVD recorder system uses this
information to set the time and date automatically.
If the time and date are not set correctly, select a different
TV channel for setting the time and date or set the time
and date manually.
1 Press and hold DVD/MON for 1 second.
2 Press SYSTEM MENU.
3 Press
1 as often as necessary to select A.
4 Press
4 or 3 as often as necessary to select
y Installation. Next, press
2 to confirm.
5 Press
4 as often as necessary to select Time/Date.
Next, press
2 to confirm.
6 Press
4 as often as necessary to select Clock preset.
7 Press
1 or 2 to select the TV channel which should be
used for setting of the time and date automatically.
0 0 Or press
1 as often as necessary to select Off and set the
time and date manually:
For this, press
4 or 3 repeatedly to select Time, Year,
Month or Date. Press 0–9 or
1 or 2 repeatedly to set
the correct value.
8 Press OK to store the settings or SYSTEM MENU to exit
without saving the changes.
9 Press SYSTEM MENU to end.
System settings
53
English
Channel/freq. CH
Entry/search 48
Programme number 07
TV channel name PHI
Decoder On
TV system PAL-BG
NICAM On
Fine tuning 0
To exit press
SYSTEM MENU
Installation
Manual search
Time 13:57
Year 2004
Month 03
Date 25
Clock preset 01
To exit press
SYSTEM MENU
Installation
Time/Date