Philips LX7500R/04 - Manual (Page 55)

Settings for TV
1 Press
2 as often as necessary to select
– EXT1: if you connected the TV to the Scart socket
EXT-1 TO TV-I/O only,
– DIG or OPT: if you connected the digital audio output
of the TV to IN DIGITAL or IN OPTICAL.
– LIN1 or LIN2: if you connected the analogue audio
output of the TV to AUDIO LIN1 or LIN2.You need this
kind of connection only if you did not connect the TV to
the Scart socket EXT1.
2 Press OK to store the settings or SYSTEM MENU to exit
without storing.
Settings for CD, CDR,TAPE
1 Press
2 as often as necessary to select
– LIN1, LIN2, DIG or OPT: the audio input to which
you conneted the equipment or
– NONE: if you did not connect this kind of equipment at
all.
2 Press OK to store the settings or SYSTEM MENU to exit
without storing.
Digital output setting
1 Press and hold DVD/MON for 1 second.
2 Press SYSTEM MENU.
3 Press
1 as often as necessary to select A.
4 Press
4 or 3 as often as necessary to select
y Installation. Next, press
2 to confirm.
5 Press
4 or 3 as often as necessary to select Audio
setup. Next, press
2 to confirm.
6 Press
4 or 3 as often as necessary to select Digital
output.
7 Press
1 or 2 repeatedly to select
➜ All: if you connected equipment with a built-in multi-
channel decoder to the digital output of the DVD
recorder system.
➜ Off: if you do not use the digital output.
➜ PCM: if you connected equipment which only supports
PCM to the digital output.
8 Press OK to store the settings or SYSTEM MENU to exit
without storing.
Speaker setup
For optimal surround sound please set
– which speakers you connected to the DVD recorder
system,
– the distance between a speaker type and your listening
position.
Note: We recommend connecting all speakers. At least the
front speakers and the subwoofers must be connected.
1 Press and hold DVD/MON for 1 second.
2 Press SYSTEM MENU.
3 Press
1 as often as necessary to select A.
4 Press
4 or 3 as often as necessary to select
y Installation. Next, press
2 to confirm.
5 Press
4 or 3 as often as necessary to select Audio
setup. Next, press 2 to confirm.
➜ Speaker setup is highlighted.
6 Press 2 to enter the menu.
➜ The menu with the current speaker settings appears.
7 Press
4 or 3 as often as necessary to select the line with
the setting you want to change.
8 Press
1 or 2 repeatedly to
– set if you connected a speaker type, or to
– set the distance between a speaker type and your
listening position.
0 0
Repeat steps 7–8 for other settings you want to change.
9 Press OK to store the settings or SYSTEM MENU to exit
without storing.
System settings
55
English
Centre connected < Yes >
Rear connected < Yes >
Front distance < 3.0 m >
Centre distance < 3.0 m >
Rear distance < 1.5 m >
To exit press
SYSTEM MENU
Audio setup
Speaker setup