Philips LX7500R/04 - Manual (Page 56)

When you select the tuner for the first time,
AUTO INST
will be displayed.The DVD recorder system searches for
available radio stations and stores them in its memory.
Selecting a preset radio station
1 Press and hold TUNER for 1 second to select the radio
tuner.
2 Press CH + or CH – repeatedly to skip to a preset radio
station or use 0–9 to enter the number of a preset radio
station.To enter a preset number with two digits, press 0–9
twice within 2 seconds.
➜ The preset number and the frequency or the station
name will be displayed.
Tuning to a radio station
1 Press and hold TUNER for 1 second to select the radio
tuner.
2 To change the waveband, press TUNER repeatedly.
3 Keep
4 or ¢ pressed for at least 1 second to select
the frequency where to start searching.
4 Next, release
4 or ¢.
➜
SEARCH is displayed and the DVD recorder system
searches for a radio station with sufficient signal strength.
0 0 To stop searching, press
4 or ¢ again.
5 Repeat steps 3–4 until you find the desired radio station.
0 0
To optimise the reception of a weak radio station, change
the frequency in small steps: For this, press
4 or ¢
briefly and repeatedly.
Switching between mono and
stereo radio reception
If you are listening to an FM radio station with a weak
signal, you may wish to switch from stereo to mono for
better sound quality.
● While TUNER is selected, press TUNER repeatedly to
select
FM-M.
0
To switch back to stereo reception, press TUNER
repeatedly to select
FM.
RDS – Radio Data System
Some FM radio stations broadcast additional information.
● Press DIM / DISPLAY repeatedly to select the following
RDS information, if available:
– station name
– frequency
– radio text messages
Storing radio stations
You can store up to 40 preset radio stations in the memory
of the DVD recorder system.
Automatic searching and storing
The DVD recorder system searches radio stations with
sufficient strength automatically and stores them in the
memory.
1 Press and hold TUNER for 1 second to select the radio
tuner.
2 Press SYSTEM MENU.
➜
AUTO INST MENU is displayed on the DVD recorder
system.
3 Next, press OK.
➜
SELECT PRESET P1 scrolls on the DVD recorder
system.
4 Press CH + or CH – to select the preset number from
which onwards the found radio stations will be stored.
Note: Already existing radio stations with this or higher preset
numbers will be deleted.
5 Next, press OK.
➜
AUTO INSTALL scrolls on the DVD recorder system.
➜ The automatic search starts. Radio stations with sufficient
signal strength will be stored.
0 0 To stop the automatic search, press STOP
9.
Tuner
56
English