Philips CID3692 User Manual
Page 27
27
Reset
When the unit hangs up, you can reset it.
1
Open the MAP/SD card socket cover.
2
Press the RESET button with a ball-point
pen or similar tool.
Tip
When the unit is reset, all the settings remain
•
unchanged.
Remove the unit
To repair, replace fuse, or replace the unit,
remove it from the dashboard.
1
Screw off the four (4) screws on the left/
right side of the unit.
2
Pull the unit out from the dashboard.
10 Others
Listen to other devices
Tip
When air conditioning information changes,
•
the air conditioning information interface will
be displayed for 10 seconds.
You can connect an external audio/video device
to the unit.
1
Connect the device to the unit with the
supplied AV cable.
2
Tap to display the main menu.
3
Tap
[AV-IN1].
4
Play the connected device (see the
instructions manual of the device).
Tip
If you connect the system to other audio
•
device through the REAR OUT L/R connector
(see “Connect wires” section), tap [AV-IN2] to
listen to that device.
AV IN
English
EN