Panasonic AJ-D230HP - Manual (Page 26)

Set-up Menus
OPERATION menu
Item Setting
No. S u p e r i m p o s e d No. S u p e r i m p o s e d
Description of settings
d i s p l a y d i s p l a y
108 FORMAT SEL 0000 DVCPRO This selects the format when an L cassette is used.
0001 DV 0: DVCPRO mode
0002 DVCAM 1: DV mode
2: DVCAM mode
<Note>
The cassette tape is played back in one of the modes listed below depending on the tape type and
settings used.
Type
FORMAT SEL setting
DVCPRO DV DVCAM
S size cassette DV DV DVCAM
M size cassette DVCPRO DVCPRO DVCPRO
L size cassette DVCPRO DV DVCAM
Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM
tapes are to be used in the playback mode, it is recommended that playback be limited to as short a
period of time as possible.
109 REC INHIBIT 0000 OFF This selects whether to inhibit recording on the VTR.
0001 ON 0: Recording is not inhibited.
1: Recording is inhibited.
The underlined number and item are the factory settings.
INTERFACE menu
Item
No. S u p e r i m p o s e d No.
d i s p l a y
200 BAUD RATE 0000
0001
0002
0003
0004
201 DATA LENGTH 0000
0001
202 STOP BIT 0000
0001
203 PARITY 0000
0001
0002
204 ACK RETURN 0000
0001
Setting
S u p e r i m p o s e d
Description of settings
d i s p l a y
1200 This sets the RS-232C transfer rate (baud rate).
2400
4800
9600
19200
8BIT This sets the RS-232C data length.
7BIT
1BIT This sets the RS-232C stop bit length.
2BIT
NONE This sets whether the RS-232C parity bit is to be used
ODD and, if so, whether with even or odd parity.
EVEN 0: The parity bit is not used.
1: The parity bit is used with odd parity.
2: The parity bit is used with even parity.
OFF This sets the RS-232C return data.
ON 0: The ACK code is not returned.
1: The ACK code is returned.
The underlined number and item are the factory settings.
<Note>
After the settings of items No.200 through No.203 have been changed, the new settings will not
take effect until the power is switched on. This means that the power must be turned off and
back on again after these settings are changed.
26