Panasonic SC-HTB351 - Manual (Page 21)

Getting started
RQT9670 21
Preparation
≥ Turn on the main unit.
Press [BÍ CI].
Check that the wireless link is
activated.
WIRELESS LINK indicator lights
≥ Red:
The wireless link is not activated.
≥ Green:
The wireless link is activated.
The unit will still consume a small amount of power
even when it is turned off (B, Í)
With the Bluetooth ® connection you can output the
audio from the connected wireless device.
Preparation
≥ Turn on the Bluetooth ® feature of the device and
place the device near this unit.
Press [ , j PAIRING] .
≥ “ ” indicator will blink quickly.
Select “SC-HTB350/351” from the
Bluetooth ® device’s Bluetooth ®
menu.
≥ Once the Bluetooth ® device is connected, the “ ”
indicator stops flashing and lights up.
Refer to the operating instructions of the Bluetooth ® device for
further instruction on how to connect a Bluetooth ® device.
If prompted for the passkey on the Bluetooth ® device, enter
“0000”.
Press [ , j PAIRING] .
Press and hold the [ , j PAIRING ]
until the “ ” indicator flashes
quickly.
Repeat step 2 of “Pairing a device”.
≥ You can register up to 6 devices with this unit. If a 7th device
is paired, the device that has not been used for the longest
time will be replaced.
≥ This unit can only be connected to one device at a time.
≥ To change the sound quality, refer to “Bluetooth
®
communication mode” on page 24.
Active subwoofer wireless
connection
Bluetooth ® connection
Pairing a device
Pairing additional devices
SC-HTB351_RQT9670_mst.book Page 21 Tuesday, March 6, 2012 7:22 PM