Panasonic TX-43P800H - Manual (Page 14)

14
Convergence Adjustment mode
Prior to adjustment, tune the broadcast signal to the video input signal
and operate the set for more than 60 minutes. If the location or direction
of the set is changed or moved, the display may be out of alignment.
If necessary, carry out the following procedures once with PAL signal
and again with the NTSC signal.
Convergence Adjustment
1
Press to display the Setup Menu.
2 Press to select the “CONVERGENCE”.
Press to access to the “CONVERGENCE” menu.
SET UP
PICTURE SHIFT
TUNING MENU
LANGUAGE
OWNER ID
CONVERGENCE
ON
SETUP MENU
TEXT SELECT ENGLISH
ACCESS
3 Press to select the “CONVERGENCE1” or the “CONVERGENCE2”.
Press to access to the function.
Example:
CONVERGENCE1
is selected.
Vertical centre marker
Horizontal centre marker
CONVERGENCE 2
CONVERGENCE 1 ACCESS
SELECT
ACCESS
RETURN TV / AV - EXIT
Convergence1 Adjustment for RED, BLUE and GREEN
Press to align the horizontal red line with the horizontal blue line.
(Becomes a white line)
Press to align the vertical red line with the vertical blue line.
(Becomes a white line)
Press N button to adjust the blue mode.
(Stores RED)
RED
Press to align the horizontal blue line with the horizontal yellow line.
(Becomes a white line)
Press to align the vertical blue line with the vertical yellow line.
(Becomes a white line)
BLUE
Press N button to adjust the green mode.
(Stores BLUE)
Press to align the horizontal green line with the vertical centre maker.
Press to align the vertical green line with the horizontal centre maker.
GREEN
Press at any time to return to the normal viewing.
Press N button to adjust the red mode. (Stores GREEN)
Only when you cannot adjust with RED and BLUE proceed to the following GREEN adjustment.
TV/AV
CONVERGENCE
N-BLUE
RED
TV / AV -EXIT
ADJUST
ADJUST
CONVERGENCE
N-GREEN
BLUE
TV / AV -EXIT
ADJUST
ADJUST
Vertical centre marker
Horizontal centre marker
CONVERGENCE
N-RED
GREEN
TV / AV -EXIT
ADJUST
ADJUST
Repeat above adjustment for each position.