Panasonic TX-43P800H - Manual (Page 25)

25
C. TEMP (Colour Temperature)
P-NR (Picture Noise Reduction)
AI (Artificial intelligence)
SCAN MODE
Picture Adjustment
Set the overall colour tone of the picture.
Press to switch between modes
STANDARD
MENU
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
C. TEMP
STANDARD
PICTURE
NTSC-TINT
COOL WARM STANDARD
Automatically reduces undesired picture noise.
When receiving PAL or SECAM Signal, SCAN MODE is
displayed.
Choose the screen refresh method:
Press to switch between modes
WEAK
STRONG OFF
AUTO
AI ON
PICTURE
P-NR AUTO
Press to switch between modes
PROGRESSIVE 100 Hz MODE
MODE Function
100 Hz MODE
PROGRESSIVE
100Hz will give a steady picture for most signal transmission.
Avoids “snaking/jaggy” effect when viewing TV program with
moving characters.
Note:
When viewing a PAL transmission (other than PAL 60) with Scan mode set to Progressive, the screen
will flicker, this is not a fault.
By pressing the Normal “N” Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed
to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
Helpful Hint (
N
Normalization)
Automatically analyses the incoming picture and processes
it to give improved contrast and optimum depth of field.
AI ON
PICTURE
P-NR AUTO
ON OFF
AI
SCAN MODE 100 Hz
ON
PICTURE
When receiving PAL or
SECAM Signal
Switching is also possible using
100Hz/
PROGRE on the remote control.