Philips SL400i/37 User Manual
Page 38
38
ENGLISH
12.3.1 Static IP settings
If you select Static IP as your Network Mode in Network > Network Config > Network
Mode, you will need to provide the SL400i with the following manual settings for its wireless
network:
IP Address
This is the fixed IP Address you want the SL400i to have in your
network. Preferably, choose one from the range 192.168.xxx.xxx.
Netmask
Enter the same netmask throughout your network.
E.g.: 255.255.255.000
Gateway
Enter the IP Address of your Internet gateway router, Wireless Base
Station, or network host computer. (E.g.: 192.168.0.1 for the host
computer that provides Internet Connection Sharing.)
DNS 1
Usually, this would be the same address as the Gateway Address
above. However, some Internet Service Providers (ISP) provide you
with separate Dynamic Name Server addresses you need to use.
This should be a valid IP Address, like xxx.xxx.xxx.xxx
DNS 2
See DNS 1.