Philips SL400i/37 - Manual (Page 52)

52 ENGLISH
Check your computer's IP configuration as follows:
For Windows 98SE / Windows Me:
1 Click 'Start', 'Run...', and enter ‘winipcfg’.
2 Click 'OK' to view the IP settings.
3
In this window, select your wireless network adapter.
4 Click 'More Info>>' to expand.
For Windows XP / Windows 2000:
1 Click 'Start', 'Run...', and enter ‘command’.
2 In the DOS box, type ‘ipconfig /all’ and press Enter.
3
For each network adapter, you will see results similar to the window on the left.
• If your network uses static IP addressing that you have set manually, then you will also
need to choose a unique IP address for the SL400i in the same range as the network's IP
addresses (e.g. 192.168.2.xxx). Use the same subnet mask as your network
(e.g. 255.255.255.000), and write down the IP address of the network device that
connects you to the Internet (the Gateway IP address).
• Sometimes your Internet Service Provider requires you to use a proxy address. Check this
with your Internet Service Provider. Alternatively, check the proxy settings of your Internet
browser software for more information.