Sony KV-29XL70K - Manual (Page 5)

Overview 5
Overview of Remote Control Buttons
GB
1 To temporarily switch off TV:
Press this button to temporarily switch off TV (the standby indicator
on TV lights up). Press again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is
not in use.
After 15 minutes without a signal and without any button being
pressed, the TV switches automatically into standby mode.
2 Selecting input source:
Press this button repeatedly until the desired input symbol of the
source appears on the TV screen.
3 Selecting channels:
Press these buttons to select channels.
For double-digit programme numbers, enter the second digit within
2.5 seconds.
4 Previous channel button:
Press this button to watch the last channel selected (provided you
watched it for at least 5 seconds).
5 This button only works in Teletext mode.
6 This button only works in Teletext mode.
7 Selecting Teletext:
Press this button to switch on teletext.
8 Control pad:
• When MENU is switched on, use these buttons to operate the
menu system. For details refer to “Using the Menu System” on
page 9.
• When MENU is switched off, press OK to show a channel
overview. Then press v or V to select the channel and then press
the OK button again to watch the selected channel.
1
2
ql
qj
qh
qg
qf
qd
qs
4
6
7
8
q;
qk
5
9
3
qa
9 Selecting screen format:
Press this button to view programmes in 16:9
mode. Press again to return to 4:3 mode.
q; Selecting channels:
Press this button to select the next or previous
broadcast channel.
qa Muting the Sound:
Press this button to mute TV sound. Press again
to restore the sound.
qs Adjusting TV volume:
Press this button to adjust the volume of the TV.
qd Displaying the menu system:
Press this button to display the menu on the TV
screen. Press again to remove the menu display
from the TV screen.
qf Selecting TV mode:
Press this button to switch off “PIP”, teletext or
video input.
qg Selecting Sound effect:
Press this button repeatedly to change the sound
effect.
qh Selecting Picture mode:
Press this button repeatedly to change the picture
mode.
qj Displaying on Screen information:
Press this button to display all on-screen
indications. Press again to cancel.
qk Swapping screens:
Whilst you are in “PIP” mode, press this button to
swap the two screens.
ql PIP (Picture in Picture):
Press this button to watch another source in a
small picture (PIP) within the main TV picture.
Press again to cancel. To select the source you
want to watch, refer to the chapter “PIP Input” on
page 16.
Besides the TV functions, all coloured and green symbol buttons are also used for Teletext operation. For
more details, please refer to “Teletext” section of this instruction manual.
01gb29xl.fm Page 5 Monday, March 29, 2004 10:46 AM