Panasonic SC-AK230 - Manual (Page 15)

RQT7796
15
Specifications
AMPLIFIER SECTION AK330
RMS output power
THD 10%, both channels driven
1 kHz
(Low channel) 90 W per channel (5 Ω)
10 kHz
(High channel) 90 W per channel (5 Ω)
Total Bi-Amp power 360 W
For South Africa
PMPO 3300 W
AMPLIFIER SECTION AK230
RMS output power
THD 10%, both channels driven
1 kHz
100 W per channel (5 Ω)
Total RMS power 200 W
For South Africa
PMPO 2000W
FM/AM TUNER, TERMINALS SECTION
Preset station FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
87.50 – 108.00 MHz (50 kHz steps)
For Europe
Sensitivity 1.8 ØV (IHF)
S/N 26 dB 1.5 ØV
For others
Sensitivity 2.5 ØV (IHF)
S/N 26 dB 2.2 ØV
Antenna terminal(s) 75 Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
For Europe, Australia and N.Z.
522 – 1629 kHz (9 kHz steps)
For others
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz) 560 ØV/m
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux 250 mV, 14.7 k Ω
Phone jack
Terminal Stereo, 3.5 mm jack
SPEAKER SECTION AK230
Type
2 way, 2 speaker system (Bass reflex)
Impedance 5 Ω
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Input power (IEC) 100 W (Max)
Output sound pressure level
81 dB/W (1.0 m)
Cross over frequency 4 kHz
Frequency range 35 Hz–28 kHz (–16 dB)
50 Hz–26 kHz (–10 dB)
Dimensions (WxHxD) 220 x 330 x 201 mm
Mass
2.7 kg
GENERAL
Power supply
For Continental Europe
AC 230 V, 50 Hz
For the United Kingdom, Australia
and N.Z.
AC 230-240 V, 50 Hz
For others AC 220–240V, 50/60 Hz
Power consumption
AK330 : 238 W
AK230 : 174 W
Dimensions (WxHxD)
250 x 330 x 341 mm
Mass AK330 : 7.1 kg
AK230 : 6.9 kg
Operating temperature range
+5 to +35 °C
Operating humidity range
5 to 90 % RH (no condensation)
Power consumption in standby mode: 0.7 W
Note:
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. AK330 The labels “HIGH” and “LOW”
on the rear of the speakers refer to High
frequency and Low frequency.
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
Maintenance
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erasing system AC erase 100 kHz
Tape speed 4.8 cm/s
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL 35 Hz–14 kHz
S/N 50 dB (A weighted)
Wow and flutter 0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
DISC SECTION
Discs played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted
disc)
(3) MP3
Bit rate
MP3 32 kbps–320 kbps
Sampling frequency
MP3 32 kHz, 44.1 kHz, 48 kHz
CD 44.1 kHz
Decoding 16 bit linear
Digital filter 8 fs
D/A converter MASH (1 bit DAC)
Pickup
Wavelength 780 nm
Beam Source Semiconductor laser
(For Norge)
Bølgelengde
780 nm
Laserstyrke Ingen farlig stråling
sendes ut
Audio output (Disc)
Number of channels
2 (Stereo) (FL, FR)
SPEAKER SECTION AK330
Type
3 way, 3 speaker system (Bass reflex)
Impedance
HIGH 5 Ω
LOW 5 Ω
Speaker(s)
Woofer 16 cm cone type
Tweeter 6 cm cone type
Super tweeter Piezo type
Input power (IEC)
HIGH 90 W (Max)
LOW 90 W (Max)
Output sound pressure level
83 dB/W (1.0 m)
Cross over frequency 2.6 kHz, 10 kHz
Frequency range 37 Hz–23 kHz (–16 dB)
44 Hz–22 kHz (–10 dB)
Dimensions (WxHxD) 240 x 330 x 229 mm
Mass
3.2 kg