Electromagnetic fields (emf), Preparing for use, Attaching the brush head – Philips ellite e9000 User Manual

Page 5: Charging

Advertising
background image

If your toothpaste contains peroxide, baking soda or bicarbonate

(common in whitening toothpastes), thoroughly clean the brush head

with soap and water after each use.

Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic

fields (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientific evidence

available today.

Preparing for use

1

To store excess cord, wind it round the cord storage hooks in the

bottom of the charger.

attaching the brush head

1

Align the front of the brush head with the front of the toothbrush

handle. Match the bars on the brush head with the notches inside

the top of the handle and slide the brush head onto the handle.



Screw the brush head nut clockwise until it is firmly tightened. If the

brush head rattles during use, tighten the nut further.

3

Remove the travel cap from the brush head before you start

to brush.

charging

Charge the Sonicare for at least 24 hours during the first few days of use.

We advise you to keep the Sonicare in the plugged-in charger when not in

use to maintain a full battery charge. When the battery is empty, it takes at

least 24 hours to fully charge the Sonicare.

-

EngliSh

5

Advertising