Battery-low indicator, Multiple-led charge indicator, Using the appliance – Philips ellite e9000 User Manual

Page 6: Useful tips, Brushing technique

Advertising
background image

1

Make sure the bottom of the handle sits back securely in the charger

so that it makes complete contact.

The handles of other Sonicare models do not fit in this charger and will

therefore not charge effectively. Do not attempt to force a handle into

this charger, as this causes damage.

Battery-low indicator

When the battery runs low, you hear 3 beeps after the Smartimer

has switched off the toothbrush. In addition, the bottom LED flashes

yellow for 30 seconds.

When you see and hear the battery-low indication, 3 or fewer 2-minute

brushings remain.

Keep the Sonicare in the plugged-in charger when not in use to maintain a

full battery charge.

Multiple-LED charge indicator

When you place the handle in the charger, the green charge indicator

LEDs flash in a rising pattern as the battery charges. The number

of flashing LEDs indicates the level to which the battery has been

charged.

When the battery is fully charged, the LEDs stop flashing and start burning

continuously. About once a minute, the charge indicator LEDs go out

briefly and then go on again. This indicates that the battery is maintained

at full charge. The full-charge indication persists until you remove the

handle from the charger.

using the appliance

useful tips

The brush head comes with a convenient travel cap. Remove the travel

cap from the brush head before you switch on the Sonicare.

Rinse the brush head and bristles after each use.

Clean the brush head weekly, including under the nut.

A fully charged Sonicare allows you to brush your teeth for 2 minutes

twice a day for approximately 2 weeks without charging. This makes it

easy to travel without the charger.

Voltage converters and plug adapters DO NOT guarantee voltage

compatibility. Always check for voltage compatibility.

-

,

,

-

-

-

-

-

EngliSh

6

Advertising