Philips HTS3251B/F7 - Manual (Page 22)

22
CONNECTIONS
EN
• By connecting this unit to the Internet, you can upgrade the software via the Internet or access BD-Live, Netflix and
vTuner services.
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
LAN
LAN WAN LAN
1 2 3 4 5
AC 120V
60Hz
LAN COMPONENT VIDEO OUT
VIDEO OUT
Y Pr
Pb
DIGITAL AUDIO IN
COAXIAL
FM
ANT
75 HDMI OUT
SUB- WOOFER FRONT CENTER REAR FRONT
SPEAKERS 4
AUDIO IN AUX 1 AUX 2
this unit
Internet
LAN cable
LAN cable
Hub or broadband router
Telecommunications
equipment (modem, etc.)
Note
• After connecting a LAN cable, set up necessary network settings.
(For the network setup, refer to “Network Connection” on page 52.)
• For more information about software upgrade, refer to “Network Upgrade” on page 56.
• For more information about BD-Live, refer to “Enjoying BD-Live Discs with Internet” on page 34.
• For more information about Netflix, refer to “NETFLIX OPERATIONS” on page 39.
• For more information about vTuner, refer to “ENJOYING INTERNET RADIO WITH vTuner” on page 40.
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a
broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port,
use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.