Philips 107B7 User Manual
Page 68
17” CDT Color Monitor 107B7
68
• Power on -
< 75w. (Test requirements refer to EN61000-3-2)
• Active off -
< 2w at 120Vac / 240Vac.
• Switch off -
< 2w at 120Vac / 240Vac.
2.6.3 Power saving conditions
The monitor enters DPM off mode when no H&V sync or one of H-sync / V-sync input is absent. No message
appears before entering DPM mode.
2.6.4 Power recovery from power saving
Both H-sync and V-sync are detected.
2.7 User Controls / Indicators / Connectors
2.7.1 Front controls
• OSD menu is accessed by the keypad.
Key (R to L)
Function
Power Tact
DC
switch
Menu OSD
Menu
“ + ”
Brightness/Adjust increase/Menu selection
“ - ”
Contrast/Adjust decrease/Menu selection
High Brightness
HB 4 levels hot key selection
• Access main menu by pressing “MENU” key.
• Select function via “+/-” & “MENU” keys, increase/decrease via “+/-” keys.
• Brightness control -
Direct access only by hotkey.
• Contrast control -
Direct access only by hotkey.