Philips PET940/93 - Manual (Page 18)

18
English
4.1 Charge the DVD player
Plug in the AC/DC adaptor
• The RED LED indi-
cates that charging is
in progress.
• When the set is not
in use, it will take
about 4 hours to fully charge it.
The RED LED will turn off when the set is fully charged.
Tips:
* You can operate the DVD player while charging. However, it
takes longer time to fully charge the battery.
* When the low battery icon appears on the screen, please
charge the player.
* Rechargeable batteries have a limited number of charge
cycles and may eventually need to be replaced. Battery life
and number of charge cycles vary by use and settings.
4.2 Powering your remote control
1 Open the battery compartment. Remove the
protective plastic tab (first time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then
close the compartment.
4 Charging the units
P001-035_PET940_93_Eng 2008.4.16 10:13 AM Page 18