Panasonic SH-FX85 - Manual (Page 4)

Setup
4
R
QTX
005
1
EN
GL
IS
H
Setup
Preparation
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the AC power supply cord after all other connections are complete.
∫ Wireless setup diagram
Place the wireless sound system within approximately 30 m (98 ft) from the home
theater unit.
[Note[
≥ Do not use the wireless sound system and digital transmitter in a metal cabinet or
bookshelf.
≥ Depending on your wall thickness and material, the operating range may be
reduced.
≥ You can use up to 3 wireless sound systems at the same time, in different rooms.
∫ Digital transmitter
Refer also to the operating instructions for your home theater unit.
∫ AC cord
Main room
Other room
Home theater
unit
e.g.
Wireless sound
system
The wireless sound system will automatically seek a clear channel if any of these
other devices interfere with its communication.
When this happens, the wireless link indicator [e.g. “
[W2] ” (SC-PTX7: “ [W1] ”)]
flashes on the home theater unit, and there is a brief interruption in audio coming
from the wireless sound system.
This is the normal operation of the product working to assure the best possible
performance of your home theater unit.
If the interference persists, try moving the other devices to another location outside
the range of the wireless sound system, or move the wireless sound system nearer
to your home theater unit.
Wireless LAN:
approx. 2 m (6-1/2 ft)
Cordless phone and other
electronic devices:
approx. 2 m (6-1/2 ft)
Wireless sound system
To avoid interference, maintain the following distances between the wireless
sound system and other electronic devices that use the same radio
frequency (2.4 GHz band).
Connections
Do not insert or remove while the home theater unit is on.
TRANSMITTER DIGITAL
SH-FX85T digital transmitter
Insert fully until you hear a click.
e.g. Rear of the home theater unit
≥ For users using the SH-FX65T transmitter
card, replace it with the SH-FX85T. Store
your SH-FX65T transmitter card in a cool
dry place for later use.
AC IN
To household AC outlet
(AC 120 V, 60 Hz)
Raise the antenna mast for best
reception.
AC power supply cord
RQTX_FX85_En.fm Page 4 Friday, January 5, 2007 3:03 PM