Troubleshooting – Panasonic WJ-HD316 User Manual

Page 154

Advertising
background image

154

• Check if the power is supplied to cameras and connected

devices.

• Check if the power plug is surely connected to the AC out-

let.

• Check if the power cord is surely inserted into the power

socket of the unit.

• The HDD SAFETY MODE is set to ON.

In this case, set the HDD SAFETY MODE to OFF.

• Check if the lens covers of the cameras have been

removed.

• Check if dust may not be sticking on the camera lens.

• Check if no user has logged in with the system controller.

• Check the level settings of users logging in. Can the users

display SETUP MENU on monitors?

• Check if the cable connections are correct.

• Check the brightness and contrast settings of monitors.

• Can the users display camera images on monitors?

Check the level settings of users logging in.

Power is not turned on.

The HDD SAFETY MODE win-
dow is displayed after turning
on the power of the unit.

Check item/Remedy

Page

TROUBLESHOOTING

Problem

No camera image is displayed
on MON 1, MON 2, and the
VGA monitor

The camera image is dim.

The log-in menu does not
appear even if you press the
button of the unit.

Cannot open SETUP MENU.

–

–

–

–

Refer to p. 119
and 121.

–

Refer to p. 67.

–

Refer to p. 119
and 121.

–

Refer to p. 64.

Check to see the following before request for repair.
Contact your dealer if a trouble cannot be solved even after checking and trying solution.

Advertising