Panasonic AW-AD700BS - Manual (Page 4)

-4-
MII portable VTR (26-pin)
WV-CA26A26 (26p-26p cable)
• 26-pin Studio Cable (RCU Cable)
WV-CA26U15
WV-CA26U30
WV-CA26U100
19. Lens Connector
This connector is used to connect the lens cable
for zoom, focus or servo control.
20. Control Connector
This connector is used to connect the optional
Pan/Tilt Control Cable WV-CA10U25.
21. Battery Connector (BATTERY)
Connect the cord from the Battery Pack to this con-
nector.
+
–
22. Recording/Tally Indicator (red) (REC TALLY)
This indicator lights when the VTR is set to the
recording mode (through the VTR Start/Stop
Button), and informs the person concerned of
scenes being recorded. The Tally indicator also
lights when the camera is in full system operation
together with the Remote Control Unit and Special
Effects Generator. In case a tape is not loaded or
the tape end is reached, or if the servo mechanism
is working improperly, this indicator will start blink-
ing to warn the operator of such faults.
Note:
If a portable VTR is not connected to the cam-
era, the Recording/Tally Indicator will not light.
23. Battery Pack Mounting Angle
Mount the Battery Pack WV-PS60/WV-PS33, the AC
Adaptor/Charger WV-PS34 or Power Separator WV-
PS700 on the camera by sliding it down along this
mounting angle.
24. 68-pin Multi Connector
When mounting this adaptor, engage the 68-pin
connectors on the camera and this connector.
Connector information
■ VTR/RCU Connector (18)
• Pin configuration
Pin No.
12V IN
GND
ENC (NTSC OUT)
GND
Not used
ENC/G/Y/Y
R/PR (R-Y)/CHROMA
SENSING GND
B/PB (B-Y)/B
GND
AUDIO+
AUDIO–
AUDIO GND
A
B
1
2
3
4
5
6
7
8
9
10
11
Pin No.
VTR TRIGGER
VIDEO IN/OUT
INTERCOM MIC
TALLY WARNING
INTERCOM SPEAKER
GND
PLAYBACK VIDEO
GND
PLAYBACK AUDIO
TRANSMIT/RECEIVE
BATTERY ALARM
GEN-LOCK IN
+12V RETURN
12
13
14
15
16
17
18
19
20
21
22
23
24
<Front View>