Panasonic AW-PB506AL - Manual (Page 8)

- 7 (E) -
Installing the SDI card
Always ask your local dealer to install the SDI card.
Rear panel
Optional card
slot cover
4 screws (8 mm) 2 screws (6 mm)
SDI card
1
Turn the power to the camera off
and remove any cables which are
connected to the power connector or
other connectors.
2
Loosen the 4 screws (8 mm) on the
rear panel of the camera, then remove
the panel itself.
3
Loosen the  screws (6 mm) on the
optional card slot cover, then remove
the cover.
4
Align the SDI card with the guides and
insert it.
Ensure the card is fully inserted.
5
Firmly tighten the  screws (6 mm) to
the optional card slot.
6
Firmly secure the rear panel with the
4 screws (8 mm).
Note
 If the screws are misplaced, use
the extra screws supplied with this
product.
Before installing the SDI card:
 Release the static carried in the body of the person to perform the installation.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the card without first releasing this static may cause malfunctioning.
 Do not allow the metal part of the card come in contact with any other metal parts.