Pentax Digtial Camera Optio P70 - Manual (Page 110)

108
3
Ta
king
Pict
ures
4
Use the four-way controller (23)
to change the setting.
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller
(23).
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
If you change the [White Balance] setting frequently, you can save time
by assigning it to the Green button (p.117).
Saving the White Balance setting 1p.123
Manual Setting
MENU C a n c e l C a n c e l
A u t o A u t o
O K O K O K C a n c e l
A u t o
OK
W h i t e B a l a n c e
MENU
A d j u s t SHUTTER
W h i t e B a l a n c e
C a n c e l C a n c e l O K O K O K C a n c e l OK