Pentax Digtial Camera Optio P70 - Manual (Page 77)

75
3
Ta
king
Pict
ures
1
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame appears (p.70).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] for using
9 mode (p.117). (The default setting is 9 mode.)
• In 9 mode, you cannot change the information on the display by
pressing the 4/W button.
• Press the 3 button in 9 mode to display the [W Setting] menu.
The [A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next
time the power switch is pressed.
Shutter release
button
Green button
38 38 38