Panasonic CT 30WX52 - Manual (Page 61)

61
V-CHIP Menu OPERATION
PROGRAM RATING EXCEEDED
ACCESS CODE
PROGRAM
RATING
EXCEEDED
ACCESS
CODE
PIP RATING
EXCEEDED
EXIT
LOCK
A
CTION
CH
CH
VOL VOL
Press twice to return to the roller guide.
To end Adjustment:
Press to exit roller guide.
This returns the set to the normal viewing.
NORMAL PICTURE
Blocking Message
If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio
will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all
locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Note:
If you enter your four-digit secret code to override rating blocks, you must reset
all rating blocks by either reprogramming or turning the TV off.
Split Screen Blocking Message
PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will
disappear and a blocking message will appear on screen for 5 seconds.
Note:
Enable PIP functions by setting Lock Set, U.S. TV PROGRAM, U.S. MOVIES,
CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.
PIP Blocking Message
Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set
rating limit, Split Screen will disappear and a blocking message will appear on screen for 5 seconds.
Note:
Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM, U.S.
MOVIES, CANADIAN ENGLISH and/or CANADIAN FRENCH to OFF.