Maintenance, Battery – Polaris Sportsman 9921828 User Manual
Page 107
                                    Advertising
                                    
                                        
                                    
                                
                                 
104
MAINTENANCE
Battery
Battery Removal
1. Disconnect the battery hold-down strap.
2. Remove the battery cover.
3. On conventional batteries, remove the battery vent tube.
4. Disconnect the black (negative) battery cable first.
5. Disconnect the red (positive) battery cable last.
6. Lift the battery out of the ATV. Be careful not to tip a conventional
battery sideways, which could spill electrolyte.
NOTICE: If electrolyte spills, immediately wash it off with a solution of one
tablespoon baking soda and one cup water to prevent damage to the 
vehicle.
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: