Panasonic PT 47WXD64 - Manual (Page 31)

M ENU O PERATIONS
29 z
ENGLISH
Convergence (cont.)
Note: Convergence seldom needs adjusting except after
moving the PTV or to make minor adjustments.
Procedure
• Press OK to enter convergence sub-menu field.
• Press CH or CH to select:
• CONVERGENCE ADJ. - Select to correct minor
convergence problem.
Note: After selecting, press OK to continue
CONVERGENCE ADJ.
• RESET TO DEFAULT - Select to set convergence
to factory default setting.
Note: After selecting, press OK to activate RESET
TO DEFAULT feature.
CONVERGENCE ADJ.
Procedure
• After pressing OK the align Green to Center screen will
be displayed.
• Then use the navigation buttons on the remote control
to align the horizontal and vertical green lines on screen,
with the cabinet reference marks on top center and left
center of cabinet, as shown below.
• Press OK button to display red center correction screen.
• Use the navigation buttons on the remote control to align
the red cross with the white cross pattern at the center of
the screen.
Note:
To prevent picture tube damage do not leave
test pattern on for an extended period of time.
• Then press “0” on the remote control keypad to display
the BLUE center correction screen, repeat procedure for
adjusting bl