Setting picture, Using the preset picture mode, Customising the picture – Palsonic TFTV935S User Manual

Page 23: Reducing picture noise, Freezing picture

Advertising
background image

Setting Picture

20

Using the Preset Picture Mode

Press MENU to display the menu main page, if the Video menu page
doesn't appear, then push ENTER (Up/Down) repeatedly to display
Video menu page.

Press ENTER to access.
The Mode item will be highlighted automatically.

Push ENTER (Left/Right) to select a desired picture mode.

Press MENU repeatedly to exit.
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].
Each preset mode has its own picture settings.
[Vivid]: Select for a bright picture.
[Standard]: Select for a normal picture.
[Mild]: Select for a fine/soft picture.
You may directly use the P.MODE button on the remote control to select a desired picture mode.

Customising the Picture

Repeat steps 1~2 in [Using the Preset Picture Mode].

Push ENTER (Down) repeatedly to select the item you wish to
adjust.

Push ENTER (Left/Right) to adjust the value of the item.

Press MENU repeatedly to exit.

* The [Hue] item is for NTSC only.

Reducing Picture Noise

Repeat steps 1~2 in [Using the Preset Picture Mode].

Push ENTER (Down) repeatedly to select the DNR item.

Push ENTER (Left/Right) to select.

Press MENU repeatedly to exit.

Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance
the picture quality by reducing the noise.

Freezing picture

Press the FREEZE button to hold on the image on the screen (the video
sources still run). Press again to reactivate the image.

Note:
For the sake of protecting the screen, please do NOT freeze a picture for a long time.

1
2
3
4

1

3
4

2

1

3
4

2

Custom

70
30
45

0

50

Weak

Standard

On

1. Mode:

2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR:
8. Color Temperature:
9. APL:

Video

Custom

70

30
45

0

50

Weak

Standard

On

1. Mode:

2. Contrast

3. Brightness
4. Colour
5. Hue
6. Sharpness
7. DNR:
8. Color Temperature:
9. APL:

Video

Custom

70
30
45

0

50

Weak

Standard

On

1. Mode:
2. Contrast
3. Brightness
4. Colour
5. Hue
6. Sharpness

7. DNR:

8. Color Temperature:
9. APL:

Video

Advertising