Panasonic PT-LB30U - Manual (Page 24)

ENTER
FREEZE SHUTTER
INDEX
WINDOW
PROJECTOR
VOLUME D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
)
*
$
&
(
'
#
Turning on the power
Before turning on the power
1. Ensure that all peripheral
devices are connected
properly.
2. Remove the lens cover.
Lens cover
Power cord
Connect the accessory power cord to the AC IN
socket.
BThe POWER button on the projector will illuminate red.
Press the POWER button.
BThe POWER button on the projector will flash green. After a short
period, it will illuminate green, and a picture will be projected.
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B If the power cord was disconnected during projection when the projector
was used the last time, projection will start after the power cord is
connected (when “POWER MEMORY” in the “OPTION” menu is set to
“ON”). Refer to page 48 for details.
B A tinkling sound may be heard when the lamp unit is turned on, but this
is not a sign of a malfunction.
#
$
%
24-E
NGLISH
POWER button