Paxar Monarch Pathfinder Ultra Gold - Manual (Page 27)

Configuring the Printer 3-3
Set Date
Current date is Thu
2-08-2001
Enter new date (mm-d
d-yy):
Enter the date (with a four-digit year), and press
Enter. If the date is correct, press Enter. The
General Options Menu appears.
Set Time
Current time is 03:0
0:34.65p
Enter new time:
Enter the time (including a colon to separate the
hour and minute). To indicate a.m. or p.m.,
include an a or p at the end. For example, 5:00p.
24-hour mode also works. When finished, press
Enter. If the time is already correct, press Enter.
The General Options Menu appears.
Set I2 of 5 Scan Lengths
I2 of 5 bar codes are used in industrial environments and contain only
numeric data. This menu option specifies the two valid data lengths (number
of digits) when you scan this bar code. See Chapter 6, “Defining Bar Code
Fields,” for more information about I2 of 5 bar codes.
Enter I2of5 Scan
Length #1 >_ _
1. Enter the first length and press Enter.
Enter I2of5 Scan
Length #2 >_ _
2. Enter the second length and press Enter.
The General Options Menu appears.
NOTE: Both lengths must be an even number.
Reset/Clear Formats
Delete All Formats?
Are you sure? Y/N _
Ï
Press Y to delete all formats in the printer. Press
N to keep the formats. The General Options
Menu appears.
CAUTION: You cannot undo a deletion.