Paxar Monarch Pathfinder Ultra Gold - Manual (Page 73)

Defining Bar Code Fields 6-15
Each combo field pulls data from up to 10
different text or bar code fields. An example
of using bar code fields to create a combo
text field can be seen in the following tag.
To show human readable data with a bar code
that does not allow human readable characters,
create a combo text field from the bar
code data field.
E n t e r i n g a S a m p l e C o m b o B a r C o d e F i e l d
Follow the steps for entering combo bar code fields on 2.0-inch long by 2.0-
inch wide supplies.
NOTE: This sample uses the printer’s factory-set defaults. For more
information about your printer’s configuration, see Chapter 3,
“Configuring the Printer.”
-=Main Menu=-
1. Design Formats
2. Print Labels
3. Configuration
1. From the Main Menu, press 1.
-=Design Menu=-
1.Create New Format
2.Edit Old Format
3.Copy Format
4.Delete Format
2. Press 1 to create a new format.
Enter Format Name
>_ _ _ _ _ _ _ _ _ _ _ _ _ _
Ï
3. Type COMBOBC for the format name. Press
Enter.
Enter Length of
Supply (55-400)
(eg.400 = 4 inches)
>_ _ _
4. Enter 200 for the length of your supply. Press
Enter.
Select Supply Width
1. 1.20 Inches
2. 1.50 Inches
3. 2.00 Inches
5. Press 3 for the supply width.
Code 39 bar code
Combo text field
(from bar code data)
for human readable