Panasonic CT-2701 - Manual (Page 9)

9
ENGLISH
NOTES:
• If you forget your password, turn on the TV. Reduce the volume to a minimum level. Press and hold VOLUME on the
front of the TV and press the 0 button on the remote control simultaneously. Select the LOCK mode, then enter a new
password.
• If you want to change the password, follow steps 1-3 and select the "CHANGE PASSWORD" option then enter your new
password.
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the
show. When the program starts, the "INPUT PASSWORD" will appear on the screen. When you want to release the V-
Chip temporarily, enter the password.
If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original setting will be
resumed. If you return to the channel you were watching you must re-enter your password to temporarily release your V-
Chip function again.
• If you are changing channels using a VCR or a cable box, while the TV remains on channel 3 or 4, the V-Chip operates
differently. When you enter your password to temporarily release the block on any channel, you have completely disabled
the V-Chip function for all stations. To reset the V-Chip turn your TV off and back on.
• Some cable boxes are built with a delay feature, in some cases it can take up to 10 seconds for a program to appear after
the password has been input.
SETTING LOCK
This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This function
allows adult screening of TV programs based upon ratings.
Press ACTION.
Press ▼ to select the LOCK mode, then press ACTION.
Enter your password (4 digits) using Direct channel
selection (0-9).
In the event of entering an incorrect password, press
then re-enter the correct password.
Enter the same password for confirmation only for the
first time.
Press ▲ or ▼ to select the V-CHIP option, then press .
Press or to select the ON, then press ACTION.
Press ▲ or ▼ to select the TV RATING or MOVIE
RATING option, then press .
Press or to select the desired rating for the
applicable video or TV channel, then press ACTION.
CLOSED CAPTION
Captions: This Closed Caption Mode will display text on the
screen in English or another language (depending on the setting
of the Closed Captions ). Generally, Closed Captions in English
are transmitted on Captions Channel 1 and Closed Captions in
other languages are transmitted on Captions Channel 2.
Text: The Text Closed Caption Mode will usually fill 1/2 of full
screen with a programming schedule or other information. After
selecting a Closed Caption Mode, it will stay in effect until it is
changed, even if the channel is changed. If the Captions signal
is lost due to a commercial or a break in the signal, the Captions
will reappear when the signal is received again. If the channels
are changed, the Captions will be delayed approximately 10
seconds.
For television programs broadcasting with Closed Captions, look
in your TV guide for the Closed Captions symbol (CC).
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning will
display text on the screen for hearing impaired viewers or it
will translate and display text in another language.
TO VIEW CLOSED CAPTIONS
1
3
4
5
6
7
2
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning,
especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow
time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed
Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange
characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
Press ACTION and press to
select the SET UP mode,
then press ACTION.
Press ▲ to select CC mode and
then press , then press ▲ or ▼
to select desired Closed Caption
(e.g. CAPTION CH1), then press
ACTION.
Press ACTION twice.
3
1
2
TV-Y
TV-Y7
TV-G : all children
: 7 years old and above
: children’s program TV-PG
TV-14
TV-MA : parental guidance
: 14 years old and above
: 17 years old and above
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to
explain the rating.
Press
▲ or ▼ to select the desired rating you want. Press to
select the setting ON or OFF, then press ACTION.
: all ages
: parental guidance
: parental guidance
for under 13 years old
G
PG
PG-13 R
NC-17
X
TV RATING
MOVIE RATING
: Parental guidance for
under 17 years old
: 17 years old and above
: adult only
OFF TV-Y7 TV-G TV-14 TV–Y TV-PG TV-MA
OFF PG PG-13 R NC-17 G X
OFF
CAPTION CH1
CAPTION CH2
TEXT CH1
TEXT CH2
/ACTION /
3N42201A E P09-P13 24/7/03, 3:54 PM 9