Precor AMT 835 User Manual
Page 27
Advertising
Assembling the AMT
25
2.
Reposition the adjustable feet as needed.
If you want to …
Then turn the adjustable feet …
Raise the front end of the AMT
Counterclockwise
Lower the front end of the AMT
Clockwise
Figure 7: Location of adjustable feet
3.
When you are finished positioning the adjustable feet,
place the unit on the floor. Try rocking it again, as
described in step 1, to verify that it is level.
4.
To install the rear pedestal, align it over the rear
crosspiece and press it gently into place.
Figure 8: Rear pedestal placement
Advertising
This manual is related to the following products: