Precor AMT 835 - Manual (Page 20)

18
Assembling and Maintaining Adaptive Motion Trainers: AMT 885 /835
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners Quantity
Locknuts (⁵₁₆-inch) 8
Hex head screws
(⁵₁₆-inch x 1³₄-inch) 4
Flat washers (⁵₁₆-inch) 8
Flat head hex drive screws
(¹₄-inch x ³₄-inch) 4
Plastic boots 2
End caps 2