Using the treadmill safety clip – Precor AMT 835 User Manual

Page 88

Advertising
background image

34

Operating and Maintaining the P30 Console

Using the Treadmill Safety Clip

The treadmill is equipped with two different stop functions,

which behave as follows:

If the user …

Then the

treadmill

belt …

And the console …

Presses down on the red

STOP button

Slows to a

stop

Shows that the exercise

workout is paused

Pulls on the lanyard

attached to the safety

clip and trips the restart

switch

Slows to a

stop

Shows the words PUSH TO

RESET SWITCH and an

arrow pointing to the

Restart switch

The restart switch is located just below the console and

immediately behind the red

STOP button, as shown in the

following illustration. When it is tripped, the bar pops up,

displaying the words

PUSH TO RESET SWITCH on its front

side. The treadmill does not operate while these words are

visible.

Figure 5: Restart switch

Instruct users on how important it is to use the safety clip

while exercising on the treadmill, and demonstrate how they

should attach it to their clothing near the waistline.

Advertising
This manual is related to the following products: