Philips 330 - Manual (Page 17)

Main features 15
3. Then select Flash Dial , press
,
and select a
name in the Phonebook displayed. Press
,
to
confirm your choice.
4. In idle mode, press and hold the programmed key
to dial the associated entry: the connection is
established. Press
)
to hang up.
You can also set hotkeys for commands (see “Hotkeys”
page 29). Hotkeys can be changed or deleted at any
time.
To clear your call list, press
,
and se-
lect Call list , then Reset . Press
,
to
reset the call list.
To clear the content of your phone-
book at once, press
,
and select
Phonebook , Phonebook settings, Reset
phonebook . Press
,
to reset the phonebook content.
This option only applies to the phonebook in your
phone, not to the SIM phonebook (see “Phonebooks”
page 35).
If you don’t want your phone to ring
when you receive a call, you can deac-
tivate the ringer. In this case, the in-
coming call symbol flashes when you receive a call, the
display shows
Incoming call , but the phone doesn’t ring.
To deactivate the ringer, proceed as follows:
1.
Press
,
and select Settings > Sounds > Ringer
volume .
2. Press left until the volume is set to Silence .
Silent mode can also be set by selecting Quick Settings
> Silence. In this case, the vibra alert is also activated.
For faster access, you can assign a hotkey to this func-
tion.
If you have set the function, your
phone vibrates when receiving an in-
coming call (activating the silent mode
via the Silence Quick setting as described above will
also activate the vibra alert). Otherwise, proceed as fol-
lows:
1.
In idle screen, press
,
and select Settings
> Sounds > Vibra .
Clear the call list
Clear the phonebook
Reset
Reset phonebook
Deactivate the ringer
Activate the vibra alert
Silence
Vibra alert
Philips330_EMEA_Ind3.book Page 15 Jeudi, 31. juillet 2003 3:48 15