Panasonic PT-60LC13 - Manual (Page 31)

31
Basic Operation
Auto shut off
To extend lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically.
2 1 H C
C B A L A M R O N
O E R E T S
P A S
O N O M
Aspect types
(P. 32)
Receivable
broad cast types
(P. 37)
Channel
Channel
caption
(P. 54)
TV status display
Using the number keys
Example 1: To select channel 125, fi rst press the 1 key, then 2, then 5.
When selecting CABLE channels 100 to 125 with the number keys, fi rst press the 1 key,
and then enter the remaining two digits.
Press the RECALL button,
except when the MENU
screen is dis played, to display
current TV status information.
Example 2: To select channel 12, press the 1 key, then 2. Channel 12 appears momentarily.
Example 3: To select channel 8, press the 8 key. Channel 8 appears momentarily.
FREEZE
Invalid operation notifi cation
If an invalid operation is attempted, the mark shown
right is displayed.
Projection display Channel up/down
buttons can also be used to select an
out side input as shown right.
* No input mode is displayed for terminals with
no equipment con nect ed.
Using projection display Channel up/down buttons to select input mode
Projection display operation
CH 125
VIDEO 1 *
VIDEO 2 *
VIDEO 3 *
COMPONENT 1 * COMPONENT 2 *
DIGITAL IN
RGB 2
RGB 1
COMPONENT 4 *
COMPONENT 3 *
CH 01
or
CABLE
125
TV
69
Example: Invalid operation was tried
during FREEZE mode.