Panasonic CF-W4 Series - Manual (Page 20)

First-time Operation
20
Getting Started
Preparations
9
Change the drive letter
*1
for the internal DVD-ROM & CD-R/
RW drive.
In some cases, the drive letters for the DVD-ROM & CD-R/RW drive or con-
nected devices (SD memory cards, external drives, etc.) may change when
the DVD-ROM & CD-R/RW drive power is turned on or off. To prevent these
letters from changing, we recommend that you allocate the drive letter for the
DVD-ROM & CD-R/RW drive from the latter half of the alphabet (e.g., "L
drive").
z
At the time of purchase, the DVD-ROM & CD-R/RW drive is allocated D
drive.
z Change the drive letter before installing the application.
The procedure shown below is an example for allocating the L drive to the
DVD-ROM & CD-R/RW drive.
A
Log on to Windows with the administrator authority.
B Click [start] - [Control Panel] - [Performance and Maintenance] - [Adminis-
trative Tools], and then double-click [Computer Management].
C Click [Disk Management] on [Storage].
D Right-click [CD-ROM 0] *2 , and then click [Change Drive Letter and
Paths...].
If the name of the DVD-ROM & CD-R/RW drive is not displayed, the drive
power may be turned off. Turn on the drive power.
E Click [Change] at [Change Drive Letter and Paths...].
You cannot set this as the C drive. If you want to set a drive letter that is
allocated to an SD memory card or external drive which is currently in use,
disconnect the card or external drive.
F Click [Assign the following drive letter] and select [L], then click [OK].
G At the confirmation message, click [Yes].
NOTE
z The drive letter for the SD memory card cannot be changed or fixed.
*1 The drive letter is a single character A to Z allocated to storage devices (drives) by Windows.
You cannot change this to the A drive, B drive, or C drive. You also cannot use a drive letter
that is currently being used by another device, or a drive letter that has already been allo-
cated to a network drive.
*2
Numbers may differ if an SD memory card or external drive is connected. When changing
drive letters, we recommend that you disconnect any SD memory cards or external drives.
‹ This concludes the first-time use operation guidelines.
NOTE
z About the Icon Enlarger:
• If the characters or icons on the screen are too small and difficult to see, after
completing step 9, click [start] - [All Programs] - [Panasonic] - [Icon Enlarger].
This will allow you to magnify the display of characters and icons on the
screen. (ΓIcon Enlarger” in onscreen Reference Manual)
• The [Icon Enlarger] can be set separately for each account.
z You can also use [Loupe Utility], which enlarges a part of the screen. (ΓLoupe
Utility” in onscreen Reference Manual)
z To improve the security of the computer, be sure to refer to "Windows Security
Center" (Î page 39) and "Windows Update" (Î page 40).
z If you use the wireless LAN, be sure to refer to "Wireless LAN" (Î page 37).
z At the time of purchase, the power saving function on the USB2.0 USB Root
Hub is set to off. To extend battery operation time, turn the power saving func-
tion on using the following procedure: