Paradyne 9820-2M User Manual

Page 229

Advertising
background image

SNMP MIBs and Traps, and RMON Alarm Defaults

B-13

9820-A2-GB20-20

June 2000

Table B-8.

enterprise-Specific Traps and Variable-Bindings (2 of 2)

Trap

Possible Cause

Variable-Bindings

enterpriseMissedSLV-
Down(16)

H

devFrExtDlciIfIndex
(devFrExt.mib)

H

devFrExtDlciDlci
(devFrExt.mib)

H

devFrExtDlciMissed-
SLVs (devFrExt.mib)

SLV Timeout Error Event
Threshold has been exceeded.

String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’

enterpriseMissedSLV-
Up(116)

SLVs (devFrExt.mib)

H

devLastTrapString
(devHealthAndStatus.-
mib.)

SLV Timeout Error Event has
been cleared.

String:
‘SLV up on $ifString because
SLV communication was
reestablished. Total SLV packets
lost is $numLost.’

enterpriseRMON-
ResetToDefault(13)

H

devLastTrapString
(devHealthAndStatus.-
mib)

All RMON-related option
changes have been reset to their
default values.

Default Factory Configuration
settings have been reloaded,
returning RMON-related options
to their original settings.

String:
‘RMON database reset to
defaults.’

enterpriseSelfTest-
Fail(2)

H

devLastTrapString
(devHealthAndStatus.-
mib)

Unit has completed
(re)initialization and a hardware
failure was detected.

String:
‘Self test failed: $

s.’ ($s is the

contents of devSelfTestResult.)

enterpriseTest-
Start(5)

For physical interfaces and
frame relay links:

H

ifIndex (RFC 1573)

H

.0.0 (placeholder)

H

devLastTrapString
(devHealthAndStatus.-
mib

F

i t

l i

it (DLCI )

At least one test has been
started on an interface or virtual
circuit.

String:
‘$testString test started on
$ifString.’ (e.g., ‘DTE Loopback
test started on Sync Data Port
S01P1.’)

enterpriseTest-
Stop(105)

For virtual circuits (DLCIs):

H

devFrExtDlciIfIndex
(devFrExt.mib)

H

devFrExtDlciDlci
(devFrExt.mib)

H

devLastTrapString
(devHealthAndStatus.-
mib

All tests have been halted on an
interface or virtual circuit.

String:
‘$testString test stopped on
$ifString.’ (e.g., ‘Disruptive PVC
Loopback test stopped on
DLCI 100 of Sync Data Port
S01P1 frame relay.’)

Advertising
This manual is related to the following products: