Panasonic 60"/65" Class 1080p Plasma HDTV TC-P60ST30 User Manual
Page 25
25
Basic
V
iewing 3D images on
TV
Change the view 3D
⇔2D
■
Simply switches 3D ⇔ 2D images (Auto mode)
●
Switches to Manual mode (see below)
3D format select
3D
2D
select
OK
(example)
●
VIERA TOOLS -->p. 22
”3D” icon also available.
■
Change 3D format (Manual mode)
During above operation press red button and switch to Manual mode.
Display “3D format select (Manual)
Press 3D to cycle through the 3D format
3D format select (Manual)
Native
Frame sequential (3D)
Frame sequential (2D)
Side by side (3D)
Side by side (2D)
Top and bottom (3D)
Top and bottom (2D)
2D -> 3D
Frame sequential (3D)
Frame sequential (2D)
3D format select (Manual)
Native
Side by side (3D)
2D -> 3D
Side by side (2D)
(example)
3D settings (Adjust 3D images)
Select “3D settings” in “Setup”
• How to Use Menu Functions (p. 48)
• Using “Setup” menu (p. 53)
■
3D adjustment
Changes 3D depth by adjusting left-right parallax.
Set “On” and adjusts “Effect”
3D adjustment
3D adjustment
Effect
On
+1
select
adjust
3D adjustment (On/Off)
Effect (-3 to +3)
Select the item and set
select
next
3D settings
3D signal notification
On
Auto detect 3D
Auto 1
2D -> 3D depth
Medium
Diagonal line filter
Safety precautions
Left / Right swap
Normal
3D adjustment
Off
Settings
Item Description
Auto detect 3D
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file,etc)
Auto 2: Same as Auto 1. plus detects 3D signal by identifying similar image in side by side or top-
and-bottom 3D formats.
Note: choose 3D mode manually, when auto detection is not available. (Off/Auto 1/Auto 2)
3D signal notification On: Displays a message according to the signal received by the “Auto detect 3D”. (On/Off)
2D->3D depth
Adjusts 3D depth. Available only when “2D->3D” is selected in “3D format select”.
(Minimum/Medium/Maximum)
3D adjustment
See above. (3D adjustment (On/Off), Effect (-3 to +3))
Left / Right swap
Change this to On when the phases are reversed. (when there is an unusual sense of depth).
(Normal/Swapped)
Diagonal line filter
On: Resolves discomfort caused by receiving a quincunx matrix signal. (On/Off)
Safety precautions
Displays message for viewing 3D images.
* The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.
* If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to
3D mode, the images may not be displayed correctly.