Panasonic 60"/65" Class 1080p Plasma HDTV TC-P60ST30 - Manual (Page 42)

42
Network link
■
Edit the name of this TV
Sets your favorite name for this TV. This name
will be used to display the name of this TV on
the screen of the other Network compatible
equipment.
Select “VIERA network name”
Menu Network link
VIERA network name
DLNA remote control Enable
VIERA
DLNA remote volume control Enable
Network remote control Enable
select
OK
Edit the name and press OK
Entering characters (p. 21)
■
Switches DLNA remote control (Disable/Enable)
Switches DLNA remote control “Disable” or “Enable”
select
DLNA remote control Enable
■
Volume setting in DMR operation (Disable/Enable)
Sets volume setting in DMR operation
• Available only when “Enable” is selected in “DLNA remote
control”
select
DLNA remote volume control Enable
■
Switches Network remote control (Disable/Enable)
Switches remote control of network device like smartphone
“Disable” or “Enable”.
select
Network remote control Enable
Network cameras list
Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
Press “Network cameras list” and
display screen
Set Network camera setting
Select
RETURN
OK
Network cameras list
Model Status Default
... ...
... ...
... ...
... ...
... ...
... ...
... ...
...
...
...
...
...
...
...
Camera name
BL-C210A Connected Camera 1
Find cameras Delete
Disconnect Default camera
select
●
For this operation, please refer to the operating
manual for the Network camera.
Start camera search.
●
Before you start to search for a camera, switch the
camera to registration mode.
●
Search condition also depends on “Network settings”
Delete camera information.
Disconnect to camera.
“Disconnected” will be displayed in “Status”.
Set to default use.
Displayed “(Default)” next to camera name.
(Available only when reconnecting)
Connect to Camera. “Connect” will be displayed in
“Status”.
Software update
Select “Software update”
select
OK
Menu Network settings
Network cameras list
Software update
Mac address
Connection test
Network connection
Wireless network
IP address/DNS settings
Wireless (WiFi)
00-0b-97-7c-65-e9
Press OK to start the Software update screen
Follow directions on the screen
●
Set “Clock” first. (p. 17)