Displaying unit identity – Paradyne 3163 User Manual
Page 29
Operation
3-7
3163-A2-GB20-10
March 1999
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
The customer identification is the only identity number
you can change.
"
Procedure
To display the DSU/CSU’s identity (ID):
1. From the top-level menu screen, select Stat.
F1
DSU ESF
Stat
Test
Cnfig
F2
F3
2. From the Status screen, press the
key until the
ID selection appears on the screen.
3. Select ID.
F1
Status:
TStat
LED
ID
F2
F3
4. The following screens appear in the order listed
each time you press the
key.
F1
Identity:
Ser=
xxxxxxx
F2
F3
F1
Identity:
Mod=
xxxx-xx-xxx
F2
F3
F1
Identity:
Cust ID=
xxxxxxxx
F2
F3
F1
Identity:
SRev=
xx.xx.xx
F2
F3
F1
Identity:
CCA=
xxxx-xxx
F2
F3