Panasonic SC-HT820V - Manual (Page 14)

14
RQT7388
Conserving power
The main unit consumes a small amount of power, even when it is
turned off. The amount of power used depends on the display
setting (
➜ page 40):
BRIGHT: 3.5 W DIM: 3.2 W OFF: 12.9 W
Audio memory backup
To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
You will need to reset some memory items after plugging the unit.
STEP
4
Radio and system connection
AC IN
A
Y
PB/CB
PR/CR
COMPONENT VIDEO OUT S-VIDEO OUT LINE
OUT LINE IN
VIDEO OUT
DVD/ VCR
VIDEO IN
EXT DVD
L
R
RF IN
RF OUT LOOP
EXT
75
AM ANT
FM ANT
LOOP ANT
GND
1 2 4
3
System cable AM loop antenna FM indoor antenna 2 AC power supply cords
Adhesive tape
Fix the other end of
the antenna where
reception is best.
AM loop antenna
Stand the antenna up on its base.
Place the antenna where the
reception is best.
Keep loose antenna cord away from
other wires and cords.
System cable
FM indoor antenna
Catch up
To disconnect
Press the catch
and pull out.
Click!
Connect the AC power supply cords after all other connections are complete.
Loosen the terminal
with a Phillips-head
screwdriver.
White
Red
Main unit
Push and insert the
antenna cables in as
far as possible. Tighten the terminal
screw again.
Subwoofer
Catch up
AC power supply cord
To household AC outlet
(AC 120 V, 60 Hz)
To disconnect
Press the catch
and pull out.
To household AC outlet
(AC 120 V, 60 Hz)
AC power supply cord
Black
AC power supply cords
Connect both AC power supply cords to enjoy all the features
of this system.
Demo function
When the unit is first plugged in, a demonstration of its
functions may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON” in the standby mode.
Press and hold [–DEMO] on the main unit.
The display changes each time you press and hold the button.
DEMO OFF
()DEMO ON
While in the standby mode, select “DEMO OFF” to reduce
power consumption.
7388en.book 14 ページ ２００３年１２月２２日 月曜日 午後９時３９分