Panasonic TU-PTA100E - Manual (Page 10)

10
ASPECT CONTROLS
The on screen selector keys that
appear for some aspect functions will
clear after a few seconds. If you
subsequently wish to select an
operation then press the Aspect key
once more for the keys to reappear.
The widescreeen aspect ratios of different films and
programmes can vary. If these are wider than a standard 16:9
aspect picture then a black band may be visible at the top and
bottom of the screen.
If, in Panasonic Auto mode, you experience problems with the
screen display size when playing back widescreen format
recordings from your VCR then it is possible that the tracking
control of your VCR requires adjustment (your VCR instruction
book will contain adjustment details).
Blue key has been pressed to move picture upwards
S-Zoom
S-Zoom allows increased magnification and the
ability to move the picture horizontally and
vertically.
16:9
16:9 will display the picture at its maximum size
but with slight elongation.
Increased magnification with S-Zoom
16:9
Just
Just mode will display a 4:3 picture at maximum
size but with aspect correction applied to the
centre of the screen so that elongation is only
apparent at the left and right edges of the screen.
The size of the picture will depend on the original
signal.
Just