Quick start guide, Operating the receiver – Panasonic TU-PTA100E User Manual
Page 6
6
#
First, ensure that the VCR is in Standby mode.
Plug in receiver and switch on
Auto setup will begin, your stations will be located and stored.
If a compatible VCR is connected to the AV2 socket,
programme data will be downloaded to the VCR via Q-Link.
See page 24.
If you are installing a new Q-Link
compatible VCR, you can now switch it ON.
Downloaded tuning data will match the
receiver’s.
If you are installing a new
NEXTVIEWLINK
compatible VCR, you will need to initiate
download manually.
See the VCR handbook for details.
Adjust
Volume
Change Channel
QUICK START GUIDE
B
If the VCR has not accepted download data from the receiver, you may need to select the Download option from the VCR’s
menu.
B
If Q - LInk is not operating correctly, check it is connected to the receiver’s AV2 socket, the SCART lead is a “full function”
type, and the VCR is compatible with Q - Link,
NEXTVIEWLINK
or similar technologies. Ask your dealer for further details.
B
For further information on Q - Link and connecting equipment, see pages 24, 28 and 29.
3
$
%
&
Select your country For Switzerland and Belgium,
select the desired language
Press the red button
Operating the receiver
Auswählen
Auswählen
Start ATP
Suchlauf
Abbruch
Land
Deutschland
Österreich
France
Italia
España
Nederland
Danmark
Sverige
Norge
Suomi
Belgien
Schweiz
E.Eu
Deutsch
OSD Sprache
02
99:21
Stored : CH44 XYZ
TV/AV : To exit
SEARCHING : PLEASE WAIT
AUTO SETUP IN PROGRESS
41
CH44