Pentair HP 600 - Manual (Page 5)

The electrical panel has
an isolated compartment,
located within the me-
chanical compartment to
prevent corrosion there.
The heat from the com-
pressor located just below
the electrical compart-
ment helps eliminate mois-
ture as well. This exclu-
sive design will substan-
tially extend the life cycle
of the heater. The fiber-
glass cabinet is corrosion
proof and is much stron-
ger than plastic cabinets.
L.E.D. Status Lights
Self
Diagnostic Indicators
(On selected models)
Heat Exchanger
Special Cupronickel Alloy
Encased In A Block of Foam
to Prevent Heat Loss & Corrosion
DESIGN ADVANTAGES
Internal Automatic Bypass
Free Flow 2" Plumbing
Automatically adjusts the water flow.
Lowest water flow restriction available.
Internal
Automatic
Bypass
WARNING
The heater must be electrically grounded and bonded in accordance with local codes, or in the
absence of local codes, with the latest national electrical codes ANSI/NFPA No. 70. All wiring
must comply with all local codes, or in the absence of local codes, with the latest national electri-
cal codes ANSI/NFPA No. 70. For proper wire and/or breaker size, please refer to specification
sheet and your local licensed electrician. Always bond heat pump cabinet to pool steel and
ground to power supply.
4250