Panasonic KX-TEB308 - Manual (Page 13)

1.1 Before Operating a Telephone
User Manual 13
When You Use a Panasonic Proprietary Telephone
If you use a Panasonic PT or DSS Console, you will be able to use some of the useful feature buttons
described below. These buttons simplify certain operations. The illustrations below may differ from the
actual buttons on your telephone.
Fixed Buttons
CO:
Used to access an outside (CO) line (or
outside (CO) line group) when making or
receiving a call. The button's
preprogrammed Outside (CO) Line
Access method determines which line is
selected. Can also be customised as a
feature button.
SP-PHONE:
Used to select handset or hands-free
operation.
AUTO DIAL/STORE:
Used for System Speed Dialling/Saved
Number Redial and storing programme
changes.
PAUSE:
Used to insert a dialling pause in a stored
number.
REDIAL:
Used to redial the last number dialled.
MESSAGE:
Used to leave a message waiting
indication, call back the party who left a
message waiting indication, or play back
voice messages. This button is provided
with an LED (Light Emitting Diode),
except for on KX-T7700 series
telephones. With KX-T7700 series
telephones, the Message/Ringer Lamp is
lit when a message waiting indication is
left at your extension.
INTERCOM:
Used to make or receive intercom calls.
MONITOR:
Used to select hands-free dialling and
monitor operation.
AUTO ANS (Auto Answer)/MUTE:
Used to answer an intercom call
automatically in hands-free mode or to
mute the built-in microphone during a
conversation.
TRANSFER:
Used to transfer a call to another party.
HOLD:
Used to place a call on hold.
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up, or
to send an EFA (External Feature
Access) signal to the telephone company
or host PBX to access external features.
CONF (Conference):
Used to establish a 3-party or 5-party
conference call.
VOICE CALL:
Used to answer an intercom call
automatically.
(CO)
(CO)