Pentair Tagelus - Manual (Page 2)

www.pentairpool.com
Phone: 800-831-7133 Fax: 800-284-4151
Added features include:
● Time-proven internal design ensures water is exposed
to maximum surface area of sand for optimal filtration
performance and more efficient backwashing.
● Flow system design also ensures maximum run times
between backwashing to save you time.
● Combination sand and water drain speeds servicing
and winterizing.
● All internal parts are threaded for fast and easy service.
● One-year limited warranty. See warranty for details.
Maximum water clarity with
minimal attention
Tagelus ®
Fiberglass Sand Filter
©2006 Pentair Water Pool and Spa, Inc. All rights reserved. 2/06 Part # P1-011
One-piece fiberglass reinforced tank
with UV-resistant surface finish for years
of service for exceptional strength
Six-position Hi-Flow™ valve provides
easy control of all filter functions:
●
Filter
●
Waste
●
Backwash
●
Closed
●
Rinse
●
Recirculate
Available from:
pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products
† Use standard #20 silica sand.
* Required clearance to remove the valve.
** Maximum flow rate.
Maximum operating pressure is 50 psi.
Tagelus filters remove particles large and small…so small that many
are undetectable by the human eye, but in quantity make water cloudy.
The reason thousands of Tagelus filters have been installed by pool
professionals worldwide is their consistency of performance over time.
Plus, they go about their work without making work for you.
Model Filter Vertical* Filter Required Flow Rate GPM Turnover Capacity (Gallons)
Number Area Sq. Ft. Clearance Diameter Sand † (lbs.) Res.** 8hrs. 10hrs. 12hrs.
TA 40D 1.8 47" 19.5" 175 40 19,200 24,000 28,000
TA 50D 2.3 51.5" 21.5" 225 50 24,000 30,000 36,000
TA 60D 3.1 57" 24.5" 325 60 28,000 36,000 43,200
TA 100D 4.9 65.5" 30.5" 600 100 48,000 60,000 72,000