Panasonic KX-TDA0484 - Manual (Page 11)

2.2 Programming
Programming Guide 11
Parameter Descriptions
The parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1 Status
Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot").
IP Address Settings
DHCP Settings
Parameter & Description Default Value Range
# IP Address
Specifies the IP address of the card.
For more information, consult your network administrator.
192.168.1.200 The following addresses
are invalid:
• Class D addresses
• Class E addresses
• Loopback
addresses
• Addresses with
host number all 0s
or 1s
# Subnet Mask
Specifies the subnet mask address of the card.
For more information, consult your network administrator.
255.255.255.0 Any address is valid.
# Default Gateway
Specifies the default gateway IP address of the card.
For more information, consult your network administrator.
0.0.0.0 Same as the parameter
IP Address, except that
the address 0.0.0.0. is
allowed.
Parameter & Description Default Value Range
# DHCP Server
Specifies the use of a DHCP server.
For details, refer to "Detailed Explanations".
Don't use Use,
Don't use
# DHCP Server Port No.
Specifies the port number for DHCP communications by the
DHCP server.
Generally, there is no need to change the default value.
67 1 to 65535
# DHCP Client Port No.
Specifies the port number for DHCP communications by the
card (the DHCP client).
Generally, there is no need to change the default value.
68 1 to 65535
# DHCP Lease Time (min) 1-1440min
This parameter is provided for engineer use only.
1440 0 (disable),
1 to 1440